Bits For Every Job
Specifically Configured For Your CarveWright System
Carving Bits
Cutting Bits
Router Bits
Bits Sets
CARVING BITS
Carving bits are used for the detailed carving or “raster” functions.
1/16” Carving Bit (White)
The default carving bit included with every CarveWright CNC.
Specifications:
- 1/16” Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 0.800”
- Selectable with all versions of Designer
$49.49
1/8″ Carving Bit (Green)
For carving foam and soft materials such as balsa or foam.
Specifications:
- 1/8” Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.000”
- Selectable with all versions of Designer
$49.49
3/16” Carving Bit (Purple)
For faster carving of low detail projects or large signs.
Specifications:
- 3/16” Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.000”
- Selectable with all versions of Designer
$49.49
1/32” Carving Bit (Lime)
For fine detail carvings such as lithophanes or smaller carvings.
Specifications:
- 1/32” Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 0.800”
- Requires Designer 3 or higher
$49.49
1/16″ Long Carving Bit (Red)
For fine detailed deep carvings.
Not for use with the Rotary Jig.
Specifications:
- 1/16″ Long Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 2.125”
- Requires Designer 3 or higher
$98.99
1/8″ Long Carving Bit (Blue)
For deep carving in hard materials and for use with the Rotary Jig.
Specifications:
- 1/8” Long Ballnose
- 1/2″ NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 2.125”
- Requires Designer 3 or higher
$98.99
CUTTING BITS
Cutting bits are used mostly for doing vector cutout functions.
The bit will follow a path, or line, designated in the software to cut an object out, drill holes, or route lines into the material.
1/16” Cutting Bit
For shallow fine detail and intricate vector cuts.
Specifications:
- 1/16” Endmill
- Straight 3 Flute Up Spiral
- Solid Carbide
- Max Depth 1/4”
- Includes 1/4″ Split Collet (unless specified)
- Selectable with all versions of Designer
$34.99
1/8” Cutting Bit (Orange)
For vector cuts in soft or medium hard materials.
Specifications:
- 1/8” Endmill
- 1/2″ NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.100”
- Selectable with all versions of Designer
$49.49
3/16” Cutting Bit (Yellow)
For vector cuts in hard or dense materials.
Specifications:
- 3/16” Endmill
- 1/2″ NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.100”
- Selectable with all versions of Designer
$49.49
DECORATIVE ROUTER BITS
Cutting bits are used mostly for doing vector cutout functions.
The bit will follow a path, or line, designated in the software to cut an object out, drill holes, or route lines into the material.
1/4″ Ball Nose
Two flute, 1/4″ steel shank, carbide tipped, with 1/4″ diameter ball end. This ball nose bit can be used for decorative line carving, carving profiles, edge work and engraving.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$30.79
1/2″ Ball Nose
Two flute, 1/4″ steel shank, carbide tipped, with 1/2″ diameter ball end. This ball nose bit can be used for decorative line carving, carving profiles, edge work and engraving.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$30.79
60º V Bit
Two flute, 1/4″ steel shank, carbide tipped, 60º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$43.99
90º V Bit
Two flute, 1/4″ steel shank, carbide tipped, 90º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$43.99
1/8″ Roman Ogee
Two cutter, 1/4″ steel shank, carbide tipped, Roman Ogee bit, with 1/8″ radius. These bits are used for decorative panel and edge work.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$49.49
3/16″ Roman Ogee
Two flute, 1/2 inch steel shank, carbide tipped, Roman Ogee bit, with 3/16 inch radius. These bits are used for decorative panel and edge work.
Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
$49.49
3/8″ Classic Ogee
Two flute, 1/4 inch steel shank, carbide tipped, Classical Ogee bit, with 3/8 inch radius. These bits are used for decorative panel and edge work.
Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
$49.49
1/2″ Classic Ogee
Two flute, 1/2 inch steel shank, carbide tipped, Classical Ogee bit, with 1/2 inch radius. These bits are used for decorative panel and edge work.
Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
$49.49
1/4” Round Over
Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/4 inch radius. These bits are used for bead, veining, and edge work.
Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
$37.39
1/2” Round Over
Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/2 inch radius. These bits are used for bead, veining, and edge work.
Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
$49.49
3/8″ Straight Bit
Two flute, 1/2 inch steel shank, carbide tipped, straight bit, with 3/8 inch diameter. These bits are used for jointing, pocket cutting, and edge work.
Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
$30.79
Keyhole Bit
Two flute, 1/4 inch steel shank, carbide tipped, keyhole bit, with 3/8 inch diameter. Includes the keyhole function software function.
Specifications:
• Includes Keyhole Function
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• Required Designer 3 or higher
$24.99
BIT SETS
Pick from our pre-configured bit sets to quickly get the tools you need and save some money while doing it.
BASIC Bit Set
$297.00
This is great basic set of the most often used cutting and carving bits.
Includes:
- 1/16″ Cutting Bit
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/4″ Split Collet
SIGN Makers Bit Set
$407.00
This bit set has a selection of the most common used bits for Sign Makers.
Includes:
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/4″ Split Collet
- Degree V Bit
- Degree V Bit
- Keyhole Bit w/software
- 1/4″ Stop Collars
DECO Router Bit Set
$490.00
The complete set of our decorative router bits all in one place.
Includes:
- 60º V Bit
- 90º V Bit
- 1/4″ Ball Nose Bit
- 1/2″ Ball Nose Bit
- 3/8″ Straight Bit
- 3/8″ Classic Ogee Bit
- 1/2″ Classic Ogee Bit
- 1/8″ Roman Ogee Bit
- 3/16″ Roman Ogee Bit
- 1/4″ Round Over Bit
- 1/2″ Round Over Bit
- 1/4″ Collet
- 1/4″ Stop Collars
- 1/2″ Stop Collars
PRO Bit Set
$544.00
The complete set of all our cutting and carving bits all in one place.
Includes:
- 1/32″ Carving Bit
- 1/16″ Cutting Bit w/split collet
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/16″ Long Carving Bit
- 1/8″ Long Carving Bit